CPI vs STONER – Frequency Counter
by AX05 » Tue May 13, 2008 12:47 pm
This is a great topic Bob. I think we have to agree to disagree!
The CPI CP2000 Base also had an optional (yes I know, its not built in) Combo Frequency Counter / Antenna Switch / RF PreAmp (Audio) called the BC2000 or Base Console. The item on the LHS on the header image of course!
This has a true frequency counter that also goes to 2 decimal places!
As the perfect companion for CPI’s ULTRA CP2000B Base Station, and the perfect complement to any CB radio, the BC-2000 Base Console from CPI ranks as the most versatile performance- enhancing accessory available today.
One unit. Six functions.
This impressive list of built-in capabilities 0f the BC-2000 begins with the exclusive, CPI-developed, 7-digit frequency counter -the only counter that gives totally accurate readings for both AM and SSB, and in both transmit and receive modes when used with CPI radios and certain other makes. Antenna line sensing gives transmit frequency for all radios.
Then there’s the built-in receive pre-amp, an antenna tuner, a TVI filter, an auxiliary antenna switch and a 6-digit LED quartz crystal clock.
Save space. Save money, too. It could take up to six individual acces- sories-and several hundred dollars-to get all the features the BC-2000 has built into it. And get the greatest performance and enjoyment possible from your CB radio-whether it’s one of ours or one of somebody else’s.
The total-performance features of the BC-2000 include: 7-digit Frequency Counter with: – 3 PPM (.0003%) accuracy – 1 to 40OW thru-Iine sensitivity – 10 MV high impedance sensitivity – Fast 5 times second update – Built-in digital offset capability for receive frequency readout for certain radio models including all CPI units. – Reads in transmit and receive modes and on AM and SSB. No adapter required.
Last edited by AX05 on Tue May 13, 2008 1:22 pm, edited 1 time in total.
AX05
Site Admin
Posts: 81
Joined: Sun Jul 29, 2007 7:50 am
Location: Melbourne Australia